How can we help?
Why are my Edge lights not responding?
Table of Contents
A soft reset can help refresh the connection between your Trimlight Edge controller, the Trimlight app, and your Wi-Fi network. To perform a soft reset, unplug the green power block located at the top of the controller. Leave the controller disconnected for 30 seconds to one minute before securely reinserting the green block.
Locate the small green power block at the top of the Trimlight Edge controller. This connector is attached to the red and black power wires and supplies power to the controller. Carefully pull the green block vertically out of the unit. Hold the green connector itself when removing it rather than pulling directly on the wires, which could loosen or damage the connection.A soft reset can help refresh the connection between your Trimlight Edge controller, the Trimlight app, and your Wi-Fi network. To perform a soft reset, unplug the green power block located at the top of the controller. Leave the controller disconnected for 30 seconds to one minute before securely reinserting the green block.
Locate the small green power block at the top of the Trimlight Edge controller. This connector is attached to the red and black power wires and supplies power to the controller. Carefully pull the green block vertically out of the unit. Hold the green connector itself when removing it rather than pulling directly on the wires, which could loosen or damage the connection.